![Bs en 10204 3.1 chemical composition](https://kumkoniak.com/102.jpg)
![bs en 10204 3.1 chemical composition bs en 10204 3.1 chemical composition](http://otvet.imgsmail.ru/download/8881903_13246cb34b93f01eda26b8a6aac6af77_800.gif)
When this standard and certificate type is shown, it only refers to the certificate type and not the steel standard. This reduced range of options should be easier to understand and work with. Type 3.2 replaces 3.1A, 3.1C and 3.2 of the previous edition.
![bs en 10204 3.1 chemical composition bs en 10204 3.1 chemical composition](https://img.pdfslide.net/img/1200x630/reader015/html5/0318/5aae20b395865/5aae20b44aed3.png)
These now only include types 2.1, 2.2, 3.1 and 3.2. EN 10204 was revised in 2004 and published as EN 10204 in 2004 with a simplified range of inspection document (certificate types). The definitions of material testing and certificate types in DIN 50049 was adopted for European standard EN 10204, first published in 1991.Ĭertificate types 2.1, 2.2, 2.3, 3.1 and 3.2 were defined, closely following the definitions in the German standard. 10204 3.1 is just another way of saying, I want a certificate of conformance.In Germany inspection documents (certificate types) were originally specified in standard DIN 50049. This means that in order for the material to be compliant with this specification, and thus your purchase order, this documentation must be included.ĮN 10204 section Type 3.1 is basically a very similar requirement, which defines the level of rigor for the testing type, and what the certificate of compliance must state.įunctionally, you can what you want if you specify materials in this way (i.e., with a relevant ASTM, SAE, etc. Heat number, AMS4928W, size, and quantity." This report shall include the purchase order number, The results of tests for chemical composition of each heat.
![bs en 10204 3.1 chemical composition bs en 10204 3.1 chemical composition](http://pic.made-in-china.com/6f3j00BMSQAYDFLUqj/EN10204-3-1.jpg)
The producer of stock for forging or flash welded rings shall furnish with each shipment a report showing If forgings are supplied, the part number and the size of stock used to make the forgings shall also be Product form and mill produced size (and/or part number, if applicable), specific heat treatment used, and This report shall include the purchase order number, lot number, AMS4928W, Heat and for the hydrogen content and tensile properties of each lot, and state that the product conforms to the Melt in the case of metal processed by multiple melting operations), the results of tests for composition of each "The producer shall provide a report showing the producer identity, country where the metal was melted (e.g., final If you put on a purchase order, for example, that you want some Titanium 6Al-4V bar per ASTM 4928, Section 4.4.1 of this document states: This may include (not an exhaustive list), melt procedures, forging procedures, chemical composition, mechanical properties, and requirements for acceptance certificates. Typically, ASTM specifications (or other material specifications) will state several important things that define material made per a given specification.
![Bs en 10204 3.1 chemical composition](https://kumkoniak.com/102.jpg)